Features

A premium quality, high hiding flat finish designed for interior walls and ceilings. Formulated for the professional; it can be sprayed & rolled with low spatter. The flat finish provides excellent touch-up properties.

Coverage

Covers up to 350-450 sq. ft. per gallon.

Where to Use

Properly prepared interior wall, trim and ceiling surfaces including previously painted and primed plaster, wood, brick, drywall, cement and metal.

Preparing the Surface

Read the Lead Warning in Cautions section. Clean the surface thoroughly to remove surface contamination, mildew, stains, and rust with an appropriate cleaner. Scrape off any loose or peeling paint. Spot prime when needed. Dull glossy surfaces with light sanding.

Application

Stir thoroughly and intermix multiple containers. Apply product at temperatures ranging from 50-90°F. Apply by brush, roller or spray application. Thinning is not recommended, but if needed for spray application, use up to 8 ounces of water per gallon.

Dry Time

Dries to the touch in 1 hour. Paint only when surface and air temperatures are 50-90°F (10-32°C). Recoat in 4 hours.

Lead Warning

WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.